Self Priming Mono Block pump sets manufactured by Mak Pump Industries are best suitable to get the corporation or Municipality supplied water through pipe line. The suction capacity is 6 M Self Priming Mono Block pumps are used for pumping out water from minor tube well also. The pumps are available in 0.5HP(0.37KW) and 1.0 HP(0.75KW) The head range is from 6 M to 55 M depending upon the rating. These are high speed pumps.(Speed is 3000 RPM- Synchronous) Also super suction pumps are available which are front suction type. Available in 0.5 HP( 0.37KW) and 1.0HP(0.75KW) Shallow Well Jet Pumps: Available for lifting water from shallow well. Has a suction capacity of 8.5 M Available in 0.5 HP(.37KW) and 1.0 HP(0.75KW)
Material Specification Chart | ||
Name of Parts | Material Composition | |
1 | Motor Bush | LTB – 4 Grade as per IS : 318 |
2 | Thrust Plate | Assam Carbon |
3 | Rotor | ” Grand Polycot ” Make Epoxy Coated Rotor |
4 | Stamping | Low – Loss Electrical Stamping ( Highly Efficient ) |
5 | Thrust Bearing | S.S 304 IS : 1570 Part V |
6 | Rotor Sleeve / Shaft | S.S 410 IS : 1570 Part V |
7 | Bowi – impeller Set | Poly Carbonate GNF 2 : 25 % Glass Filled |
8 | Pump – Motor Shell | S.S. 202 / 304 IS : 1570 Part ll Redpectively |
9 | Pump MOtor Casting Parts | FG 200 as Per IS : 210 |
10 | PumpSleeve | Hard Choromed and SS : 410 as per IS : 1570 Part V |
11 | Pump Bush | Nitrile Rubber and LTB – 4 Grade as per IS : 318 |
12 | Winding Wire | Warpimg ( Coated ) and PVC as per IS |
Radial Flow Water Filled Submersible Pump Set Suitable For 75 mm & Above Dia. Bore well, Maximum Outside Diameter of Pump Sets 73mm
Copyright © 2016 Makpump.co.in, All rights Reserved.
Powered by : #1 Vinayak InfoSoft