Submersible pump sets are being manufactured since 2003. The Submersible Pump Sets are manufactured with latest manufacturing techniques and under stringent quality control. The unit is awarded ISO:9001: 2008 certification and manufactures BIS marked products. The products are also awarded STAR Ratings by Bureau of Energy Efficiency. The range is as follows: (Water Filled) V3 Submersible Pump sets: 0.5 HP(0.37KW) to 1.5 HP(1.1KW) V4 Submersible Pump Sets: 0.5 HP(0.37KW) to 7.5 HP(5.5KW) V5 Submersible Pump sets: 3.0 HP (2.2KW) to 15HP (11 KW) V6 Submersible Pump Sets: 3.0 HP(2.2KW) to 40HP(30KW) V7 Submersible Pump Sets: 6.0 HP (4 KW) to 25 HP(18.5 KW) V8 + V6(Motor) Submersible Pump Sets: 6.0 HP(4 KW) to 25HP(18.5 KW) V8 Submersible Pump Sets: 7.5 HP (5.5 KW) to 80 HP (60 KW)
Material Specification Chart | ||
Name of Parts | Material Composition | |
1 | Motor Bush | LTB – 4 Grade as per IS : 318 |
2 | Thrust Plate | Assam Carbon |
3 | Rotor | ” Grand Polycot ” Make Epoxy Coated Rotor |
4 | Stamping | Low – Loss Electrical Stamping ( Highly Efficient ) |
5 | Thrust Bearing | S.S 304 IS : 1570 Part V |
6 | Rotor Sleeve / Shaft | S.S 410 IS : 1570 Part V |
7 | Bowi – impeller Set | Poly Carbonate GNF 2 : 25 % Glass Filled |
8 | Pump – Motor Shell | S.S. 202 / 304 IS : 1570 Part ll Redpectively |
9 | Pump MOtor Casting Parts | FG 200 as Per IS : 210 |
10 | PumpSleeve | Hard Choromed and SS : 410 as per IS : 1570 Part V |
11 | Pump Bush | Nitrile Rubber and LTB – 4 Grade as per IS : 318 |
12 | Winding Wire | Warpimg ( Coated ) and PVC as per IS |
Radial Flow Water Filled Submersible Pump Set Suitable For 75 mm & Above Dia. Bore well, Maximum Outside Diameter of Pump Sets 73mm
Copyright © 2016 Makpump.co.in, All rights Reserved.
Powered by : #1 Vinayak InfoSoft